|
||||||||||||||||
Accessories Please click on the pictures for more info on the product. |
|
Power Supplies |
Capture Podule |
 |
 |
A range of Power supplies are available. |
IR code capture device for use with a PC. Used to capture IR codes from handsets for use with PodFlow. |
PNP-8 |
PNS-12 |
 |
 |
8 Button control panel for use with Podules. This connects via a single Cat5 Cable. |
PodNet 1:2 splitter |
IR Emitters |
Mounting Kits |
 |
 |
Infra-red emitters |
A series of mounting brackets |
Wall Plates |
SPC-PP1 |
 |
 |
A series of passive wall panel with pushbuttons and leds |
SPC-PP1 Relay Pack The SPC-PP1 gets its input power (12V) and control signals from the SPC and has 2 relays which are rated at 250V @ 10A. |
PRP2 |
Serial Pea |
|
 |
PRP2 Relay Pack The PRP2 gets its input power (24V) and control signals via the PODs V+ and Open Collector outputs and has 2 relays which are rated at 250V @ 10A. |
The Serial Pea received RS232 strings and converts these into 8 open collector outputs |
Relay Pea |
232 Pea |
 |
 |
Four independent SPCO relays for use with Podule Open collector outputs when volt free switching is required |
The Ikon 232 Pea is used to split a single RS232 Transmit to feed two receivers. It can be used as a stand alone module and is mounted on a Din rail base. |
Podnet Hub |
HDMI Cable |
 |
 |
The PodNet Hub can be used to connect and power up to 8 PodNet devices together. |
To complement the HDMI-ST screw terminal adaptor Ikon provide HDMI cable. The cable can is provided in multiples of 5m upto a maximum length of 200m |